Rechercher dans les propriétés de la page

Cette page fournit une interface de navigation pour trouver toutes les valeurs d’une propriété et une page donnée. D’autres interfaces de recherche disponibles incluent la recherche de propriété, et le constructeur de requête ask.

Liste de résultats

• 1 Attach 2 off d0015594 Use M6 x 20 butt … 1 Attach 2 off d0015594 Use M6 x 20 button socket , A form washer and M6 nyloc nuts to fix. Do not use washer under head of button head screw, on use on nut side 2 Align 2 off parts using checks shown (different assembly shown but checks remain the same )ssembly shown but checks remain the same )  +
• 1 Attach 2 off cylinders to D0015001 using M6 x 8 x20 shoulder bolts with M8 A form washer and Heavy M8 washer to space as shown 2 Attach to D0015002 as shown  +
• 1 Fit 1 0ff D0015603 pivot shaft with 2 off M6 x 12 socket caps and A Form washers 2 Use D0015481 shaft to fix base of cylinders as shown with M6 x 8 x 20 shoulder bolt and spaced with M8 heavy washer as shown  +
• 1 off 1 D0015006B indicated holes should measure as shown. Rework by hand if issued old spec ECR raised 06/06/23 <br/>  +
• 1 off Check part D00150001 has been supplied to new specification Check indicated hole, should measure 8.2mm. If not open up with hand drill Drawing change requested 06/06/23 to amend from 8mm to 8.2mm  +
• <div class="icon-instructions caution-i …
  ......Ensure Fixing nut from indicated point is removed from each cylinder and disregarded
  2 off
  .....All Flow regulator fittings P0001198 should be set at this point to the correct flow rate. To do this follow these steps 1 Wind regulation screw clockwise until fully in. Do not overtighten, stop when light resistance is felt. 2 Turn regulation screw exactly 2.5 turns anticlockwise to set flow rate
  1 Fit 2 off P0001198 fittings to cylinder P0001110 2 Fit spherical bearing P0000049 to cylinder end , Do not add final tension or adhesive to the nut
  8 fittings to cylinder P0001110 2 Fit spherical bearing P0000049 to cylinder end , Do not add final tension or adhesive to the nut <br/>  +
• All bolts to have Loctite 243 adhesive applied unless otherwise stated All Threaded Pneumatic connections to have Loctite 570 applied All bolts to be pen marked once adhesive applied and correct tension added  +
• Attach D0015483 as shown using M8 x 25 socket caps, Heavy M8 washers and M8 nyloc nuts  +
• Fit B0001154 Plastic Roller Blue Ø30 x 160 Long. Spring Loaded Shafts x 4 <br/>  +
• Insert 2 off B0001103 bush flange into Roller cylinder bed arm as shown S  +
• Insert bush B0001168 2 off into P0000049 spherical bearing 2 off  +