Rechercher dans les propriétés de la page

Cette page fournit une interface de navigation pour trouver toutes les valeurs d’une propriété et une page donnée. D’autres interfaces de recherche disponibles incluent la recherche de propriété, et le constructeur de requête ask.

Liste de résultats

• 1 Ensure brackets D0015492 Vertical Beam … 1 Ensure brackets D0015492 Vertical Beam Adjustment Plate x5 and D0015493 Lateral Beam Adjustment Plate x 5 are cleaned with appropriate taps to remove any debris  
  ...Note central upright has bracket assembly fitted reverse to others
  2 Assemble brackets as shown in positions indicated. Use M10 set bolts and back off with M10 nuts only (no washers) where indicated
  ed. Use M10 set bolts and back off with M10 nuts only (no washers) where indicated <br/>  +
• 1 Use plate fixings to secure hepco beam to mounting brackets 2 Adjust mounting plates to line up with hepco rail mounting slots, using M8 square nuts and spring 3 Apply M8 x 16 and M8 penny washers to lock beam in position  +
• Always Use Loctite 243 on all fasteners Always use Loctite 570 on all threaded pneumatic connections Pen mark all fasteners to show finalised  +
• Fit 2 off P0000200 5mm 6mm elbows to indicated points  +
• Once mounting brackets are mounted into position, doweling is required to hold position when jigs are removed  +
• Setting jigs can now be removed All levels should be checked once removed to confirm that positions have been held  +
• Sign off is required at this point to double check and ensure quality . Supervisor approval required  +