Cette page fournit une interface de navigation pour trouver toutes les valeurs d’une propriété et une page donnée. D’autres interfaces de recherche disponibles incluent la recherche de propriété, et le constructeur de requête ask.
Liste de résultats
- <u>Peel back small area of acoustic foam backing</u> Position and neatly align within door aperture Remove all adhesive backing and finalise acoustic foam +
- All bolts to have Loctite 243 adhesive applied unless otherwise stated All Threaded Pneumatic connections to have Loctite 570 applied All bolts to be pen marked once adhesive applied and correct tension added +
- Drill through pre drilled holes 8.5mm in door to create clearance holes for mounting of door handle Fix with M8 x 16 socket caps only +
- Fit 2 off door hinges using <u>'''M4 x 12 button head , A form washers, Shakeproof washers and standard nuts'''</u> (please use these fasteners) Do not use A form washer under button head on hinge Ensure hinges are mounted parallel +
- Fit Large Clear stuga sticker and Stuga service sticker to front of door Fit stuga sticker 300mm down from top face of door and central Fit service sticker butted against bottom of stuga sticker and central +
- Fit panel edging to all edges that are not covered by hinges or switch mounting block ensure corners are pressed in flat and hinges have edging strip cut out around them +
- Measure and cut acoustic foam to internal area of front door using cutting board and straight edge Cut Acoustic foam to clear switch mounting block Approximate size 755 x 845mm . Measure to define exact measurement +
- Please ensure that when the following step is carried out, attention is paid to the straightness of the sticker when applied Measure from both corners indicated to ensure sticker is parallel to top of door +
Français
English
Deutsch
Español
Italiano
Português