Rechercher dans les propriétés de la page

Cette page fournit une interface de navigation pour trouver toutes les valeurs d’une propriété et une page donnée. D’autres interfaces de recherche disponibles incluent la recherche de propriété, et le constructeur de requête ask.

Liste de résultats

• 1 Assemble 93 links together , ensure all links are orientated the same way . 2 Identify the female end of the assembled links 3 Fit 2 more links of A0001113, but fit in a reversed orientation  +
• 1 Open all links of trunking using a small … 1 Open all links of trunking using a small flat screwdriver to release 2 Fit A0001112 Energy Chain Separator to the following positions Start from end A , fit 2 separators to first reversed link. 3 Counting from the first separators fitted, fit additional separators to every tenth link 4 This is correct. There will be 4 links with no separator between last fitted separators and mounting bracketast fitted separators and mounting bracket  +
• Add identification markers to 2 off E0000439 cables X291 X294 Fit cables to energy chain in section 1 as shown. Female Plugs should exit energy chain at End A . Leave 360mm from end of energy chain to the end of the female plugs.  +
• Attach mounting brackets A0001114 1 Attach male bracket to reversed links and orientated as shown, This end will be identified as A 2 Attach female bracket to opposite end orientated as shown. This end will be identified as B  +
• Cut 3 0ff lengths of 6mm x 4mm black air pipe at 9 meters Add identification as follows 2419 1311 1319 Fit to section 3 and leave 1 meter of pipe exiting the energy chain at the male bracket / reversed link end  +
• Total links of for A0001113 Energy Chain is 95 Double check correct quantity  +
• Use Cable E0001237 Pre Made Cable :Beckoff Extension AM8032 9.0m x 1 and identify as 'SXA' Fit to section 2 and leave Female plug and 0.5meter of cable to exit energy chain at the male bracket / reversed link end  +