Rechercher dans les propriétés de la page

Cette page fournit une interface de navigation pour trouver toutes les valeurs d’une propriété et une page donnée. D’autres interfaces de recherche disponibles incluent la recherche de propriété, et le constructeur de requête ask.

Liste de résultats

• 2 off on each assembly 9 off in total & … 2 off on each assembly 9 off in total
  ..Ensure Set bolts are used
  Fit concentric wheels to assembly . Assemble with in this order M5 x 30 set bolt- M5 A form washer- Delrin wheel assembly B0001160- spacer B0001161 - Main assembly - A form washer- M5 Nyloc nutrin wheel assembly B0001160- spacer B0001161 - Main assembly - A form washer- M5 Nyloc nut  +
• 2 off on each assembly 9 off in total 1 … 2 off on each assembly 9 off in total 1 Check that part B0001162 sits flush into hole on rack mounting plate. It may be required to remove burrs from manufacture to achieve this 2 Attach delrin wheel in this order. M5 x 30 Set bolt-M5 A form washer-Delrin Wheel (B0001160) -Eccentric cam(B0001162)- Assembly - M5 A Form Washer- M5 Nyloc nut Do not add final tension to this wheel assembly as adjustment will be required at a later pointjustment will be required at a later point  +
• 9 off 1 Attach D0015550 to D0015551 as shown. Use 2 off M6 x 10 socket caps with A form washers 2 Ensure bracket is positioned bottom slot as shown and faces marked are parallel  +
• 9 off Attach P0000010 elbow fitting to cylinder P0001111 as shown  +
• 9 off Mount cylinder to bracket as shown. Loctite 243 should be used on cylinder locking nut  +
• <div class="icon-instructions caution-i …
  ...It is vital the correct bolts are used in this assembly M5 x 30 SET bolts must be used, not socket caps
  image attached to clarify what a set bolt ised, not socket caps</div> </div> image attached to clarify what a set bolt is  +
• Attach drive rack D0015255 to assembly as shown. Use m6 x 16 socket caps, M6 A form washers and M4 x 20 socket caps  +
• Check that part B0001162 sits flush into hole on rack mounting plate. It may be required to remove burrs from manufacture to achieve this  +
• Use Loctite 243 on all fasteners Use Loctite 570 on all threaded pneumatic connections Pen mark all bolts when finalised  +