Rechercher dans les propriétés de la page

Cette page fournit une interface de navigation pour trouver toutes les valeurs d’une propriété et une page donnée. D’autres interfaces de recherche disponibles incluent la recherche de propriété, et le constructeur de requête ask.

Liste de résultats

• <div class="icon-instructions caution-i …
  ...Ensure hard stop is fitted in correct orientation as strike post is offset on mounting plate. See picture for correct orientation
  1 Over ride lock function so piston on cylinder can move freely 2 Mount cylinder in position shown . Do Not apply adhesive to these fasteners yet . use M6 x 20 socket caps and penny washers to secure cylinder assembly 3 Mount hard stop as shown using M6 x 20 socket caps and 20mm diameter washers at top position , Bottom position uses M6 x 20 socket caps and A form washerster washers at top position , Bottom position uses M6 x 20 socket caps and A form washers  +
• Black take up pads D0008288 and D0015742 are not fitted at this point . These will be fitted at a later stage of build  +
• Clean threads in parts D0015742 Takeup Pad Right ZX5 x 1 D0008288 Takeup Pad Left (D7339) (Wet/P F Matt) x 1  +
• Mount remaining 3 take up arms as shown using fasteners stated in previous step  +
• Use 4 off F0000299 M6 d nuts and 4 off M6 x 20 socket caps and M6 penny washers to mount takeup arm at position shown  +
• Use loctite 243 on all fasteners Use Loctite 572 on all threaded pneumatic connections Pen mark all fasteners to show finalised  +
• these steps follow on from dokit [[R0015278 Mount Completed Assemblies]]  +