Rechercher dans les propriétés de la page

Cette page fournit une interface de navigation pour trouver toutes les valeurs d’une propriété et une page donnée. D’autres interfaces de recherche disponibles incluent la recherche de propriété, et le constructeur de requête ask.

Liste de résultats

• 1 Measure and cut a piece of wire A0001065 wire basket to bridge between indicated points.  +
• 2 Measure and cut section of A0001065 to bridge between point 2 indicated  +
• 2 off Leveling brackets D0015611are fitted to indicated positions  +
• Ensure all wire baskets are fitted to the shown slots 1 Lay 1 full length of A0001065 wire basket between these points 2 Position end to be mid bracket 3 Allow overhang this end  +
• Fit 6 off basket support bracket to pre drilled holes at indicated points . Secure using M8 x 20 socket caps and Large M8 washers  +
• Fix wire baskets to support brackets using 6 off A0001061 Use M6 x 20 button sockets, M6 penny washers and m6 nyloc nuts  +
• Mount 2 off D0015070B cabinet braces to indicated point on main frame Use 4 off M8 x 30 socket caps and Heavy M8 washers to secure  +
• Position bracket as shown and drill 1 off … Position bracket as shown and drill 1 off M6 tapped hole and secure with M6 x 20 socket cap and heavy washer. Use engineers level to level bracket, then mark and drill second M6 tapped hole. Finalise fasteners, whilst using level to ensure bracket remains level on the indicated plain. Repeat for 2nd bracket positiond plain. Repeat for 2nd bracket position  +
• Use loctite 243 on all fasteners Use Loctite 572 on all threaded pneumatic connections Pen mark all bolts to show finalised  +