Rechercher dans les propriétés de la page

Cette page fournit une interface de navigation pour trouver toutes les valeurs d’une propriété et une page donnée. D’autres interfaces de recherche disponibles incluent la recherche de propriété, et le constructeur de requête ask.

Liste de résultats

• 1 Remove all protective plastic wrap from … 1 Remove all protective plastic wrap from D0015571 Transfer Arm (2018) 2 Tap all holes to clear debris. 3 Check area shown for sharp edges burrs. If present, dress down and report as rework. Use grinder with 'polirico' attachment 4 Clean with air to remove swarf and debris 5 Wipe transfer beams with duck oil on a clean ragansfer beams with duck oil on a clean rag  +
• 1 Use M5 x 25 socket caps and M5 A form washers to fix V rail to beam 2 Ensure V rail is touching jigs and assembled V rails are fully closed . 3 Used pistol drill on torque setting 5 with 4mm bit to drive fasteners into place 4 Finalise by hand  +
• 1 transfer beam does not have any V rails attached In total 8 transfer beams to be fitted with 2 V rails per beam 1 transfer beam to be fitted with no V rails  +
• Align 20 off B0001170 spacer over fixing holes as shown  +
• All bare transfer beams should be visually checked for straightness on the indicated face . Any discrepancy should be reported  +
• Each V rail contains 2 off B0001155 OpenRail 1000mm Long Clean and align 2 off as shown to create One double V rail  +
• Fit 4 off alignment jigs as shown, using jig fasteners  +
• Position assembled rail over spacers as shown. ensure correct orientation of assembled rail as shown  +
• Repeat process and assemble 7 more transfer beams following the previous steps  +
• Repeat process for second rail on transfer beam  +
• Use Loctite 243 on all fasteners Use Loctite 570 on all threaded pneumatic connections Pen mark all bolts when finalised  +