Rechercher dans les propriétés de la page

Cette page fournit une interface de navigation pour trouver toutes les valeurs d’une propriété et une page donnée. D’autres interfaces de recherche disponibles incluent la recherche de propriété, et le constructeur de requête ask.

Liste de résultats

• 1 Mount R0000706 Bench assemble Infeed Datum rollers using 4 off M8 x 70 socket caps and M8 heavy washers . Orientate as shown <br/>  +
• 1 Insert 8 of M10 x 30 flatbottom grubscr … 1 Insert 8 of M10 x 30 flatbottom grubscrews into holes indicated. Wind in until flush with bottom face 2 Mount D0007678 Infeed Clamp Support as shown. 3 Use 4 off M8 x 80 socket cap, each with a heavy M8 washer and a Heavy M8 penny washer 4 Wind each M10 grubscrew ( 8 off in total) 6 exact full turns to lift the beam evenly away from the indicated face 5 Apply light tension to M8 socket caps to hold support bar in positionocket caps to hold support bar in position  +
• <div class="icon-instructions caution-i …
  ...Datum roller assembly can be fitted in 2 positions. Ensure the correct position is used for ZX5
  itted in 2 positions. Ensure the correct position is used for ZX5</div> </div>  +
• Use locktite 243 on all fasteners Use loctite 572 on all threaded pneumatic connection Pen mark all fasteners to show finalised  +