Rechercher dans les propriétés de la page

Cette page fournit une interface de navigation pour trouver toutes les valeurs d’une propriété et une page donnée. D’autres interfaces de recherche disponibles incluent la recherche de propriété, et le constructeur de requête ask.

Liste de résultats

• ...ECR raised 21/11/23 to add M5 mounting holes for trunking onto hood. Until processed, add on assembly Fit A0001098 37mm x 75mm trunking to rear of hood, secure with M5 x 10 button sockets and M5 penny washers Provide drilling details for fixing  +
• 1 Check Mounting blocks have pin fitted as … 1 Check Mounting blocks have pin fitted as shown. A pair is required (mirrored to each other ) If not modify M6 x 35 socket cap 2 off as follows * Reduce thread length to 10mm * Use studlock 270 and fit to block ensuring final tension * Cut shank of socket cap down to 10mm protrusion and dress clean 2 Fit 1 off mounting block to point shown , using 2 off M5 x 16 socket countersunk s to fix. Ensure correct orientation of block and correct face has countersunk holes for fixing 3 Fit 2nd block to safety flap and fit to hood as shown . Use 2 off M5 x 16 socket caps and M5 penny washers to fix 4 Adjust 6mm pins to centralise flap and stop end float of assembly. Finalise 2 off M5 grubscrews of assembly. Finalise 2 off M5 grubscrews  +
• 1 Ream 6mm holes indicated to ensure 2 Pi … 1 Ream 6mm holes indicated to ensure 2 Pins locate correctly 3 Drill flap to suit stiffening bar 4 Attach end brackets and stiffening bar using 4 off M5 x 16 socket caps and 4 off M5 A form washers and 2 off M5 x 12 socket caps and 2 off M5 penny washers 5 Insert 6mm rods and add 2 off M5 x 6 kcp grubscrew 6 Fit hazard tape to flap6 kcp grubscrew 6 Fit hazard tape to flap  +
• All stickers must be applied wet to ensure … All stickers must be applied wet to ensure no air bubbles are present Use spray foam and squeegee to fit 1 Large clear STUGA sticker to top of hood. Stuga to read from front 2 Large clear STUGA sticker on rear of hood 3 Service sticker on rear of hood 4 Ambient temperature sticker to front of hood 5 Consumables sticker to front of hood 6 Ear defence sticker to front of hoodod 6 Ear defence sticker to front of hood  +
• L-R configuration of safety flap  +
• There has been instances of the safety flap being fitted incorrectly and hindering saw operation. To clarify correct position, larger counter balance on safety flap must be furthest away from saw head  +