Rechercher dans les propriétés de la page

Cette page fournit une interface de navigation pour trouver toutes les valeurs d’une propriété et une page donnée. D’autres interfaces de recherche disponibles incluent la recherche de propriété, et le constructeur de requête ask.

Liste de résultats

• 1 Cut 2 off pieces of M0001053copper tub … 1 Cut 2 off pieces of M0001053copper tubing at 360mm and straighten in vice 2 Tap one end on each pipe to M5 and add fitting P0000456 to end 3 Pipe opposite end of fitting flatten 4 Mount pipes to tool post as shown using A0001046 P Clip 6mm Steel /Rubber Liner x 6 and M5 x 12 socket caps and heavy M5 washers Ensure orientation is as shownM5 washers Ensure orientation is as shown  +
• 1 Mount D0001964 Tool Sensor Logo Plate as shown using M5 x 10 socket counter sunk 2 Add M0000153 small sticker to face  +
• 1 Use 2 off M6 x 30 socket cap to secure post as shown 2 Add 2 off pieces of 4mm black air pipe at 300mm  +
• Attach E0001120 Sensor: Ultrasonic M8 20-150mm to E0001082 4 pin m8 sensor single ended cable 1 Fit sensor to tool mount post using using m3 x 20 pan head fasteners Note orientation 2 Use small tie wraps to secure cable  +
• Attach 4 off m4 tie bases with m4 x12 button sockets to D0001963 Tool Sensor Post  +
• Check if indicated hole is M4 or M3. If M4 rework to M3 by adding new fixing point 10mm from M4 hole  +
• Drawing for mount plate updated 19/07/23 to include tapped holes for mounting of parts Pipe as shown using Use M3 x 25mm caphead to secure Y adapter P0000046 Fitting: 'Y' Adaptor 6mm x 1 P0000149 6mm to 4mm reducing stem x 2  +
• Pipe identification 2699 Pay attention to P0000160 flow regulation direction when mounting. Use M4 x 5 button heads to mount tie bases, and M4 x 30mm to mount flow regulator  +
• Use Loctite 243 on all fasteners Use Loctite 572 on all threaded pneumatic connection Pen mark all fasteners to show finalised  +