Cette page fournit une interface de navigation pour trouver toutes les valeurs d’une propriété et une page donnée. D’autres interfaces de recherche disponibles incluent la recherche de propriété, et le constructeur de requête ask.
Liste de résultats
- Bring the Saw pusher to the end where the chain tensioner and sprocket are. Remove the pusher arm by taking out 2 bolts below the arm. Remove the face plate by taking out the 4 bolts in the fron of the plate Take off the top roller bearings. +
- Clip the Yellow innner piece of the bearing out of the new Bearings recevied. Do the same on the bearings currently fitted. Replace the old with the new inner piece, making sure they are clipped in correctly. +
- Remove the bolts from the stop block holding it to the shaft. +
- Slide the pusher assembl;y off the shaft +
- Take out the 4 bolts holding plate with sprocket on. Make sure the chain comes away from the sprocket teeth. Slide this plate out. <br/> +
- loosen off the 8 bolts on the back of the tension assembly to release the tension. +
- slide the pusher assembly back on. Re-fit stop block using the bolt which was removed. +
Français
English
Deutsch
Español
Italiano
Português