Rechercher dans les propriétés de la page

Cette page fournit une interface de navigation pour trouver toutes les valeurs d’une propriété et une page donnée. D’autres interfaces de recherche disponibles incluent la recherche de propriété, et le constructeur de requête ask.

Liste de résultats

• 1 <div class="icon-instructions cautio … 1
  ...ensure 1 off m8 x 40 set bolt and A form washer is fitted to plate before bolting to load motor as access is restricted
  2 Using 4 off m6 x 25 set bolts and A form washers , adapter plate should be mounted to Booooo82b motor in configuration as shown. Loctite 243 Adhesive should be applied to fasteners
  otor in configuration as shown. Loctite 243 Adhesive should be applied to fasteners <br/>  +
• 1 Mount electro clutch backplate to … 1 Mount electro clutch backplate to indicated holes using m5 x 16 socket caps 4 off with loctite adhesive 243 2 Slide on second part of clutch and use to align clutch backplate before tightening all 4 m5 bolts to secure back plate in position 3 Orientate electro clutch as shown in pictureientate electro clutch as shown in picture  +
• 1 Clutch gap should be set to allow corr … 1 Clutch gap should be set to allow correct operation of clutch 2 The part indicated (item 2) should move freely back and forwards onto the friction plate 3 Clutch friction plate (item 3) mounted to the load roller 4 Set the gap between these two parts to the thickness of a piece of paper 5 The adjustment is achieved by undoing item 5 and moving friction plate towards/away from clutch assemblyon plate towards/away from clutch assembly  +
• 1 Add second M8 x 40 cap head and A form washer to assembly and fit assembly as shown , then secure both m8 set bolts  +
• New motor B0000082b will need modification of drive key to function correctly. 5mm should be removed from key in situ as shown in photo This will enable clutch plate to move to desired position on assembly  +