Rechercher dans les propriétés de la page

Cette page fournit une interface de navigation pour trouver toutes les valeurs d’une propriété et une page donnée. D’autres interfaces de recherche disponibles incluent la recherche de propriété, et le constructeur de requête ask.

Liste de résultats

• * Check that the drive belt is free from … * Check that the drive belt is free from wear or any cuts / nicks along the circumference of the belt * Ensure that the drive belt has sufficient tension via the tension roller * Check the leadscrew for any wear or damage * Grease with 1 Pump if lubricator not fitted Grease with 1 Pump if lubricator not fitted   +
• * Lightly oil rail surface with supplied … * Lightly oil rail surface with supplied oil * Ensure reference sensor is not damaged
  ...There are 4 rails in total, 2 at front and 2 at rear
  
  t">...There are 4 rails in total, 2 at front and 2 at rear</div> </div><br/>   +
• * Remove any debris from clamp pads and rollers * Visually check the rollers and clamp pads for damage or excessive wear, oil rollers with supplied oil, visually check cylinder rods for damage   +
• * Visually check pinion wheel and slewing … * Visually check pinion wheel and slewing ring for any damage, chips or cracks * Remove any debris that may have become caught up in the teeth * Turn assembly through full range of movement to check for any tight spots * Grease ring on grease points. 1 Pump each * Grease ring on grease points. 1 Pump each   +
• <div class="icon-instructions info-icon …
  ...Only used if compound VS cut machine option
  * Check rollers and runner surface for damage or wear * Lightly oil rollers and runner surfaceeck rollers and runner surface for damage or wear * Lightly oil rollers and runner surface  +
• Check saw blade teeth for wear or damage, … Check saw blade teeth for wear or damage, check saw blade for warping
  ...When changing blade – ensure that the correct type and size saw blade is used, using the wrong type / size of blade can cause accuracy issues – Please refer to your Stuga manual for the correct specification of blade or contact Stuga Service for further assistance
  
  ion of blade or contact Stuga Service for further assistance</div> </div><br/>  +
• Ensure that the Hose and Chute are not blo … Ensure that the Hose and Chute are not blocked by large offcuts
  ...Side open the Extraction separator base to empty offcuts
  Check Hose for damage / cuts – replace if necessarympty offcuts</div> </div> Check Hose for damage / cuts – replace if necessary  +
• Use a suitable foam cleaner for cleaning off the glue and tape residue left by the profile rolling along the beds  +
• Using the supplied straight-edge, check the backfence alignment through machine. Misalignment is the normat cause of inaccuracy issues  +