Voir la source de Changing Main Saw Blade

{{Tuto Details
|Description=<translate>How to change the main saw blade on a Stuga machine</translate>
|Categories=Maintenance
|Difficulty=Medium
|Duration=10
|Duration-type=minute(s)
|Tags=Saw, blade, change
}}
{{Introduction
|Introduction=<translate>Stuga recommends this blade be changed after 2 weeks of cutting - use the following symptoms to determine if the blade

needs changing:

Awful cutting sound / smell

Profile dragging (sizes too short)

Brown burnt swarf

Smoke coming out of profile end while cutting

<br />{{Warning|...The 500mm blade is sharp and can be awkward to manouver out of the saw, please be careful}}<br /></translate>
}}
{{Materials
|ItemList={{ItemList
|Item=Spanner 24mm
}}{{ItemList
|Item=D0005207 Stuga Flange C Spanner
}}
}}
{{EPI
|EPI=use-protective-handwear, warning-of-sharp-objects, hand-injury
}}
{{Tuto Step
|Step_Title=<translate>Stop Cutting</translate>
|Step_Content=<translate>Make sure you have stopped cutting and nothing on the machine is moving - press an emergency stop button to ensure this.</translate>
}}
{{Tuto Step
|Step_Title=<translate>Open the door</translate>
|Step_Content=<translate>See the tutorial: 

[[Autocut Open Guard Doors|https://stuga.dokit.app/wiki/Autocut_Open_Guard_Doors]]</translate>
}}
{{Tuto Step
|Step_Title=<translate>Loosen Blade</translate>
|Step_Content=<translate>Using the saw blade 'C' spanner and the 24mm spanner, loosen and remove the main bolt going through the centre of the  saw blade - anti-clockwise to loosen.</translate>
}}
{{Tuto Step
|Step_Title=<translate>Remove Fastening</translate>
|Step_Content=<translate>Once the bolt is loose; remove the bolt, washer and plate. 

{{Pin|...Remember which order they are in, as this is the order they must go back on.}}</translate>
}}
{{Tuto Step
|Step_Title=<translate>Remove Blade</translate>
|Step_Content=<translate>Now carefully remove the blade, with this blade being 500mm it will be tight. Ensure you take note of which way the blade spins.

{{Info|...The blade cutting direction at the top is towards the rear of the machine}}<br /></translate>
}}
{{Tuto Step
|Step_Title=<translate>Fit New Blade</translate>
|Step_Content=<translate>Fit the new blade ensuring the teeth are facing the same way it was removed</translate>
}}
{{Tuto Step
|Step_Title=<translate>Refit Bolt, Plate and Washer</translate>
|Step_Content=<translate>Now fit the plate, washer and bolt ensuring it's tight</translate>
}}
{{Tuto Step
|Step_Title=<translate>Measure new blade thickness (Kerf)</translate>
|Step_Content=<translate>Measure the thickness of the brand new or sharpened blade - this should be between 3.8mm - 4.1mm</translate>
}}
{{Tuto Step
|Step_Title=<translate>Update kerf Parameter</translate>
|Step_Content=<translate>Through the winSaw software go into '[F5] Settings' and update the 'Kerf' parameter to what the blade thickness is. 

Press 'Save'.</translate>
}}
{{Tuto Step
|Step_Title=<translate>Close the door</translate>
|Step_Content=<translate>Press '[F10] Reset Saw', now close the main door and ensure it will not open and that the 'Guard' message clears</translate>
}}
{{Tuto Step
|Step_Title=<translate>Reset Estop</translate>
|Step_Content=<translate>Reset the emergency stop circuit by unlatching emergency stop buttons and pressing the physical blue 'ES RESET' button</translate>
}}
{{Notes}}
{{PageLang
|Language=en
|SourceLanguage=none
|IsTranslation=0
}}
{{Tuto Status
|Complete=Draft
}}