Voir la source de Autocut Open Guard Doors

{{Tuto Details
|Description=<translate>How to open the doors on a Stuga Autocut  machine</translate>
|Categories=Maintenance, Operation
|Difficulty=Very easy
|Duration=2
|Duration-type=minute(s)
|Tags=open, guard, door
}}
{{Introduction
|Introduction=<translate></translate>
}}
{{Materials}}
{{EPI}}
{{Tuto Step
|Step_Title=<translate>Wait for machine to finish production</translate>
|Step_Content=<translate></translate>
}}
{{Tuto Step
|Step_Title=<translate>Press Emergency Stop</translate>
|Step_Content=<translate>Once the machine has stopped production, press an emergency stop button to ensure the machine is safe to work on</translate>
}}
{{Tuto Step
|Step_Title=<translate>Click on Open Door button</translate>
|Step_Content=<translate>Through the winSaw software press '[F6] Open Door' - there maybe up to a 60 second delay before the door can be opened

{{Info|...On all machines built or refurbished since 2010, the saw door is interlocked with a Zero Speed detector that will only allow the door to open when it has stopped spinning}}<br /></translate>
}}
{{Tuto Step
|Step_Title=<translate>Nudge the door lightly</translate>
|Step_Content=<translate>The catch, located near the front handle,  may need a little help to release.

Pull the door fully open</translate>
}}
{{Tuto Step
|Step_Title=<translate>Open the Top Door</translate>
|Step_Content=<translate>There are two types of top door

<br />

# Interlocked - the top door has a solenoid lock and will open directly
# Internal catch - the door can only be opened from the inside. The catch is located directly below the hatch window on the inside of the machine</translate>
}}
{{Notes}}
{{PageLang
|Language=en
|SourceLanguage=none
|IsTranslation=0
}}
{{Tuto Status
|Complete=Draft
}}