Modifier DokitPage : Fitting ZX5 Saw Infeed Guide

Vous ne pouvez pas modifier cette page, pour les raisons suivantes :

Oups ! Vous n'avez pas la permission de modifier ce tutoriel car vous n'êtes pas connecté. Pour modifier ce tutoriel, créez un compte ou connectez-vous.
Oups, vous n’avez pas la permission de modifier les « Page ».

Image principale

Mots-clés

= Problem = When the profile is being fed into the saw side, it sometimes fouls on the back, fixed, upright, rollers of the saw clamp. As the nearest guide on the saw infeed table is over 2 feet away, a slight bow on the profile can cause this. Is it possible to fit another guide or roller closer to the entrance to the saw? = Solution = Infeed guide has been designed to fit on the saw hood Part number D0015738{{#annotatedImageLight:Fichier:Fitting ZX5 Saw Infeed Guide Image 1.jpg|0=300px|hash=|jsondata=|mediaClass=Image|type=frameless|align=center|src=https://stuga.dokit.app/images/c/cd/Fitting_ZX5_Saw_Infeed_Guide_Image_1.jpg|href=./Fichier:Fitting ZX5 Saw Infeed Guide Image 1.jpg|resource=./Fichier:Fitting ZX5 Saw Infeed Guide Image 1.jpg|caption=|size=300px}}Two holes will need to be drilled # Top hole through the top hood # Bottom hole through frame bar Use straight edge to give 1mm clearance behind backfence rollers Attach with bolt, nyloc nut and washers

Chargement de la page