Voir la source de TB0111 Replacing Paxar Printers with Baby Zebra

{{Tuto Details
|Description=<translate>The TLP-2844 has a pin-identical serial port to the Paxar printer, therefore it will plug straight in. The power supply to it has a different connector, however, a converter should be provided in the upgrade kit.</translate>
|Categories=Software
|Tags=Paxar, Zebra, Upgrade
}}
<translate><br />
{| class="wikitable" border="1" cellspacing="0" cellpadding="0"
| width="111" valign="top" |'''TB Number:'''
| width="563" valign="top" |0111
|-
| width="111" valign="top" |'''Originator:'''
| width="563" valign="top" |Gareth Green
|-
| width="111" valign="top" |'''Machine:'''
| width="563" valign="top" |All
|-
| width="111" valign="top" |'''Date:''' 
| width="563" valign="top" |22/05/08
|-
| width="111" valign="top" |'''Circulate to:'''
| width="563" valign="top" |Service
|-
| width="111" valign="top" |'''Title:'''
| width="563" valign="top" |Replacing Paxar Printers with  Baby Zebra
|}
The TLP-2844 has a pin-identical serial port to the Paxar printer, therefore it will plug straight in. The power supply to it has a different connector, however, a converter should be provided in the upgrade kit.

Along with this TB, there should also be a software kit containing the upgrade files needed. The label format files are basic standard ones, so if the customer has a specialised label, the “prnfmt.zft” file will need to be altered to suit customer requirements – contact Gareth Green if this is the case
<br />

== Standalone Saw ==

* Copy saw.exe version 10.xx or higher to c:\
* Copy prnfmt.zft and offcut.zft to the c:\ drive
* In params.saw change the following parameters:
* printer=4
* prformat=\prnfmt.zft
* oCutFormat=\offcut.zft

== Flowline / ZX ==

* Copy saw.exe version 11.xx or higher to c:\saw
* Copy prnfmt.zft and offcut.zft to the c:\saw drive
* In c:\params.saw change the following parameters:
* printer=4
* prformat=\prnfmt.zft
* oCutFormat=\offcut.zft

== Microline ==

* Copy setPrint.exe version 2.0 or higher to c:\
* Copy goPrint.exe version 2.0 or higher to c:\
* Copy prnfmt.zft and offcut.zft to the c:\ drive
* In params.mul change the following parameters:
* mlLabelFormat=c:\prnfmt.zft
* mlOffcutFormat=c:\offcut.zft

<br /></translate>
{{PageLang
|SourceLanguage=none
|IsTranslation=0
|Language=en
}}
{{AddComments}}
{{Tuto Status
|Complete=Draft
}}