Voir la source de Make Backup Image of CNC PC

{{Tuto Details
|Description=<translate>Generate a backup image of the Front End PC to extra Hard disk</translate>
|Difficulty=Easy
|Duration=20
|Duration-type=minute(s)
|Tags=Backup, Image, CNC PC
}}
{{Introduction
|Introduction=<translate>Each CNC PC comes with a USB Backup Stick.

This is for those machines that have an Extra disk (D:)  (normally used for the Virtual PC)</translate>
}}
{{Materials}}
{{EPI}}
{{Tuto Step
|Step_Title=<translate>Imaging</translate>
|Step_Content=<translate># Put USB stick in PC.
# Power on Press F12 while booting to go into boot mode.
# Select boot option UEFI USB SanDisk
# On First Screen Select Backup.
# De- check the 480GB disk
# Check the one with several partitions.
# Select this disk.
# Select Image this Disk.
# Set destination folder to D:\
# Press Finish.
# It will take 15 to 20 mins.
# Close off Windows
#  Remove USB stick
#  Re-boot</translate>
}}
{{Notes}}
{{PageLang
|SourceLanguage=none
|IsTranslation=0
|Language=en
}}
{{Tuto Status
|Complete=Draft
}}