Voir la source de Fault Finding - Gripping with Toothed Gripper

{{Tuto Details
|Description=<translate>Fault finding Guide for issues with toothed gripper on ZX5 and Flowline TruLoc system</translate>
|Categories=Maintenance
}}
<translate><br />
{| class="wikitable"
|+Fault Finding Guide
!Issue
!Symptoms
!Root Causes
!Checks
|-
| rowspan="5" |Slim Z Profile Twists when Gripper Approaches on Saw side
| rowspan="5" |The combination of the pushing movement of the gripper and the side channel pressure causes the profile to roll over before the gripper can engage
Particularly an issue on Ovolo profile with a rolled edge, and on shorter offcuts
|Side Channel Pressure too high
|Check it is set at 1.5bar. 
Often increased because the channel is not operating smoothly and correctly
|-
|Rear Fence Alignment
|Rear Fences can get knocked out of alignment. Check with a straight edge or similar
|-
|Channel bar alignment parallel to rear fence
|With channel closed, check the distance of the channel bar to the rear fence upstands
|-
|Software Version
|Check [https://stugaltd.monday.com/boards/304269981 Control Systems Log] to ensure the software version
|-
|Gripper mechanics
|Check the mechanical integrity of the gripper system
[[R0015011 Bench assemble Gripper]]
|-
|
|
|
|
|}</translate>
{{PageLang
|SourceLanguage=none
|IsTranslation=0
|Language=en
}}
{{AddComments}}
{{Tuto Status
|Complete=Draft
}}