Voir la source de Autocut Cutting Tall Profiles

{{Tuto Details
|Description=<translate>How to configure a Stuga Autocut saw to cut tall profiles</translate>
|Categories=Operation
|Difficulty=Very easy
|Duration=5
|Duration-type=minute(s)
|Tags=Autocut, VS, Tall, Profile, Clamps
}}
{{Introduction
|Introduction=<translate>What to do when cutting tall profiles; such as VS outerframe  and patio outerframe</translate>
}}
{{Materials}}
{{EPI}}
{{Tuto Step
|Step_Title=<translate>Autoload Off</translate>
|Step_Content=<translate>Take 'AUTOLOAD' off before coming onto either of these profiles so the saw stops it automatic loading cycle</translate>
}}
{{Tuto Step
|Step_Title=<translate>Open Door</translate>
|Step_Content=<translate>Once the machine has stopped and the next bar in the queue is a tall profile, open the guard door

[[Autocut Open Guard Doors|https://stuga.dokit.app/wiki/Autocut_Open_Guard_Doors]]</translate>
}}
{{Tuto Step
|Step_Title=<translate>Loosen the Quick Release Kipp Clamp Levers</translate>
|Step_Content=<translate>Loosen (push in and turn anti-clockwise) the  quick release handles for the saw clamp assembly and the eject clamp assembly</translate>
}}
{{Tuto Step
|Step_Title=<translate>Raise Clamps to clear profile</translate>
|Step_Content=<translate>Now move each clamp assembly up so the block is inline with the marking on the shaft.</translate>
}}
{{Tuto Step
|Step_Title=<translate>Retighten Clamps</translate>
|Step_Content=<translate>Tighten (push in and turn clockwise) the orange quick release handles

Pull the orange quick release handles out (towards you) and swivel them so they are pointing up</translate>
}}
{{Tuto Step
|Step_Title=<translate>Reverse the process when changing back to low profiles</translate>
|Step_Content=<translate></translate>
}}
{{Notes}}
{{PageLang
|SourceLanguage=none
|IsTranslation=0
|Language=en
}}
{{Tuto Status
|Complete=Draft
}}