Voir la source de Full Version Upgrade TwinCAT3 WinMulti

{{Tuto Details
|Description=<translate>Installing a full system software upgrade on a TwinCAT3machine</translate>
|Categories=Software
|Difficulty=Medium
|Duration=1
|Duration-type=hour(s)
|Tags=PCEngineer
}}
{{Introduction
|Introduction=<translate>If a PC fails on a machine in the field and the hard drive data cannot be recovered, it is necessary to replace the PC. This may create a version conflict, as the new PC will have later versions of twinCAT installed than the original


This tutorial outlines the steps required to bring all the machine systems up to the latest level to ensure compatibility

<br />{{Warning|...This is a one-way process that cannot be reversed}}<br /></translate>
}}
{{Materials}}
{{EPI}}
{{Tuto Step
|Step_Title=<translate>Set up replacement PC from Scratch</translate>
|Step_Content=<translate>[[Create a TwinCAT Project from Scratch]] 

This procedure ensures that the front end PC has the latest TwinCAT version, and that the PLC source control program is correctly integrated, meaning the latest PLC code version will be available</translate>
}}
{{Tuto Step
|Step_Title=<translate>Copy latest front end (winmulti) software</translate>
|Step_Content=<translate>Latest version of winMulti software is located at

G:\builds\Latest Software Versions\winmultiv6

<br />{{Idea|...Copy the entire folder contents}}<br /></translate>
}}
{{Tuto Step
|Step_Title=<translate>Install back end latest version</translate>
|Step_Content=<translate>[[Updating Beckhoff TwinCAT3 Backend Version]]

This ensures the back end PLC is on the latest TwinCAT version</translate>
}}
{{Tuto Step
|Step_Title=<translate>TwinSAFE</translate>
|Step_Content=<translate></translate>
}}
{{Tuto Step
|Step_Title=<translate>Update Control Systems Log Board</translate>
|Step_Content=<translate>https://stugaltd.monday.com/boards/304269981

* Date
* Front End Version
* Back End Version
* Version Control Type</translate>
}}
{{Tuto Step
|Step_Title=<translate>Check Parameters</translate>
|Step_Content=<translate>ps_ejectPush=1000</translate>
}}
{{Notes}}
{{PageLang
|Language=en
|SourceLanguage=none
|IsTranslation=0
}}
{{Tuto Status
|Complete=Draft
}}