Voir la source de Updating Realtime Drivers for EtherCAT

{{Tuto Details
|Description=<translate>Updating the network drivers to allow EtherCAT compatibility</translate>
|Categories=Software
|Difficulty=Easy
|Duration=10
|Duration-type=minute(s)
|Tags=Drivers, EtherCAT, 6015
}}
{{Introduction
|Introduction=<translate>On the 6015 PC, it is often supplied without EtherCAT drivers.

This tutorial describes how to install the drivers on a specific port to allow a "Device" to be found when scanning in a Visual Studio Project</translate>
}}
{{Materials}}
{{EPI}}
{{Tuto Step
|Step_Title=<translate>Scan Devices</translate>
|Step_Content=<translate></translate>
|Step_Picture_00=Updating_Realtime_Drivers_for_EtherCAT_Realtime_Drivers_1.jpg
}}
{{Tuto Step
|Step_Title=<translate>Check drivers</translate>
|Step_Content=<translate>If you have I/O connected but do not see a device with (EtherCAT) then check that the drivers have been installed.</translate>
|Step_Picture_00=Updating_Realtime_Drivers_for_EtherCAT_Realtime_Drivers_2.png
}}
{{Tuto Step
|Step_Title=<translate>Open the Network and Sharing Center</translate>
|Step_Content=<translate></translate>
|Step_Picture_00=Updating_Realtime_Drivers_for_EtherCAT_Realtime_Drivers_3.jpg
}}
{{Tuto Step
|Step_Title=<translate>Click Change Adapter Settings</translate>
|Step_Content=<translate></translate>
|Step_Picture_00=Updating_Realtime_Drivers_for_EtherCAT_Realtime_Drivers_4.jpg
}}
{{Tuto Step
|Step_Title=<translate>Check which is IO Port</translate>
|Step_Content=<translate>The ethernet connection should be connected to the top port - this should display "Connected"

The I/O (EtherCAT) port should be the other one.

Rename this adaptor "EtherCAT"</translate>
}}
{{Tuto Step
|Step_Title=<translate>Run TcRteInstall.exe</translate>
|Step_Content=<translate>Open file explorer and navigate to C:\TwinCAT\3.1\System and open TcRteInstall.exe</translate>
|Step_Picture_00=Updating_Realtime_Drivers_for_EtherCAT_Realtime_Drivers_6.jpg
}}
{{Tuto Step
|Step_Title=<translate>Find Adaptor</translate>
|Step_Content=<translate>You should see the relevant adapter (Whatever name you gave it in step5 - Ethernet 2 in this instance) under Compatible devices, select it and click the Install button.</translate>
|Step_Picture_00=Updating_Realtime_Drivers_for_EtherCAT_Realtime_Drivers_7.jpg
}}
{{Tuto Step
|Step_Title=<translate>Wait for install</translate>
|Step_Content=<translate>After a brief pause you should see the adapter move to Installed and ready to use devices</translate>
|Step_Picture_00=Updating_Realtime_Drivers_for_EtherCAT_Realtime_Drivers_8.jpg
}}
{{Tuto Step
|Step_Title=<translate>Scan Devices again</translate>
|Step_Content=<translate></translate>
|Step_Picture_00=Updating_Realtime_Drivers_for_EtherCAT_Realtime_Drivers_9.jpg
}}
{{Tuto Step
|Step_Title=<translate>EtherCAT device now listed</translate>
|Step_Content=<translate>you should now see an EtherCAT device in the new I/O found list</translate>
|Step_Picture_00=Updating_Realtime_Drivers_for_EtherCAT_Realtime_Drivers_10.jpg
}}
{{Notes}}
{{PageLang
|SourceLanguage=none
|IsTranslation=0
|Language=en
}}
{{Tuto Status
|Complete=Draft
}}