Voir la source de RMZX505 Under Machining Centre Fence

{{Tuto Details
|Description=<translate>Fitting removable panels to front and rear of machining centre opening</translate>
|Categories=Administration
|Tags=Compliance, Mesh
}}
<translate>= Objective =
To fit a guard fence to cover the area under the machining centre front and rear where the swarf bins are removed and emptied. The guard must comply with BS EN ISO 13857. The panel should be removable, but will need a tool. The guard fixings must be retained on the guard. The operators must be trained in the correct use of them
<br /></translate>
{{PageLang
|SourceLanguage=none
|IsTranslation=0
|Language=en
}}
{{AddComments}}
{{Tuto Status
|Complete=Draft
}}