Voir la source de ZX5 Safety Standards And Compliance

{{Tuto Details
|Description=<translate>ZX5 Safety Standards And Compliance</translate>
|Categories=Specification
}}
<translate>==CE Safety Standards, Hazard Identification & Compliance==
Consideration has been made to ensure that the ZX5 conforms to or exceeds all current international safety standards.

===Moving Slides and Rotating Ballscrews===
The ZX5 machining centre has CNC Driven axes including a rotary axis which could present possible trapping and crushing dangers.  This has been addressed by isolating and disabling these axes via approved safety hinges or locking safety switches fitted to all access doors.  

These switches control an approved safety gate relay which disables the Servo drives via the "Safe Torque Off" approved input function. 

===Revolving Spindles / Blades===
The ZX has revolving spindles in the Multihead and a rotating blade in the Saw. 

Consideration of any danger to the operator has been addressed by the interlocked guarding mentioned above.  Neither spindles or saw will run if any of the interlocked guarding is open.

Saw blades with inertial overrun are protected by an approved Zero Speed Detection system which interlocks the guards until the blade is stationary
<br />

= Harmonised Safety Standards Applied =
{| class="wikitable"
!BS EN ISO
!Year
!Title
|-
|13849-1
|2015
|Safety  of machinery — Safety related parts of control systems Part1
|-
|13850
|2015
|Safety of machinery — Emergency stop function — Principles for design
|-
|13854
|2019
|Safety of machinery – Minimum gaps to avoid crushing of parts of  the human body
|-
|13855
|2010
|Safety of machinery - Positioning of safeguards with respect to the  approach speeds of parts of the human body
|-
|14118
|2018
|Safety of machinery – Prevention of unexpected start-up
|-
|14119
|2013
|Safety of machinery — Interlocking devices associated with guards —  Principles for design and selection
|-
|14120
|2015
|Safety of machinery — Guards — General requirements for the design and  construction of fixed and movable guards
|-
|4871
|2009
|Acoustics - Declaration and verification of noise emission values of  machinery and equipment
|-
|60204-34
|2016
|Safety of machinery – Electrical equipment of machines – Part 34:  Requirements for machine tools
|}
<br /></translate>
{{PageLang
|Language=en
|SourceLanguage=none
|IsTranslation=0
}}
{{AddComments}}
{{Tuto Status
|Complete=Draft
}}