ZX4 Sensors

Showing all major sensors on the ZX4 Machine

Sensor, Manual ZX4_Transfer_Table_image25.png

Sensors

No.	Sensor
1	Off Cut Sensors. There are 8 of these along the Multi Head infeed table.  They are to check the correct length of off cut has been loaded.
2	Profile Loaded Sensor.  This tells the Machine the profile has been loaded from the infeed table ready to be fed into the Multi Head.
3	Gripper Sensor. This sensor is located on the Gripper assembly and tells the machine the profile has been fed into the Multi Head.
4	Material Loaded Sensors.  There are 2 off these Sensors and they tell the Machine that the profile has been loaded to the Saw In-Feed table.
5	Laser
6	Saw Blade Up/Down.  This sensor tells the machine the vertical position of the saw blade.
7	Saw Blade (Rotation).  This sensor tells the machine the rotational position of the saw blade
8	Profile Eject Sensor.  This sensor tells the machine that the profile is clear of the cutting and can be ejected from the Saw.

en none 0

Draft