Voir la source de Upgrade Autoflow to Windows 10

{{Tuto Details
|Main_Picture=Upgrade_Autoflow_to_Windows_10_c6015__web_main.jpg
|Main_Picture_annotation={"version":"2.4.6","objects":[{"type":"image","version":"2.4.6","originX":"left","originY":"top","left":-332,"top":-34,"width":504,"height":259,"fill":"rgb(0,0,0)","stroke":null,"strokeWidth":0,"strokeDashArray":null,"strokeLineCap":"butt","strokeDashOffset":0,"strokeLineJoin":"miter","strokeMiterLimit":4,"scaleX":1.88,"scaleY":1.88,"angle":0,"flipX":false,"flipY":false,"opacity":1,"shadow":null,"visible":true,"clipTo":null,"backgroundColor":"","fillRule":"nonzero","paintFirst":"fill","globalCompositeOperation":"source-over","transformMatrix":null,"skewX":0,"skewY":0,"crossOrigin":"","cropX":0,"cropY":0,"src":"https://stuga.dokit.app/images/8/88/Upgrade_Autoflow_to_Windows_10_c6015_web_main.jpg","filters":[]}],"height":449.61240310077517,"width":600}
|Description=<translate>Steps to upgrading an Autoflow to Windows 10, replacing both the front end and back end PCs</translate>
|Categories=Software
|Difficulty=Hard
|Duration=1
|Duration-type=day(s)
|Tags=Autoflow, Windows 10, Upgrade
}}
{{Introduction
|Introduction=<translate>Upgrading an Autoflow to Windows 10 involves upgrading two PCS

#The Beckhoff control PC
#The Camera PC


The Beckhoff PC is not upgradable so needs to be completely replaced. We use the miniature [https://www.beckhoff.com/english.asp?industrial_pc/c6017.htm Beckhoff C6017] for this

It is not cost effective to upgrade and old camera PC, so a new one is supplied

=== Notes ===

* The Beckhoff PC is now powerful enough to run the front end and back end.
* The camera PC is there to replace the camera PC on site and contains the storage for the machine cameras
* Because the Beckhoff PC has limited hard drive space, the DDRIVE will be on the cameraPC,</translate>
}}
{{Materials}}
{{EPI}}
{{Tuto Step
|Step_Title=<translate>Set up the 6017 PC</translate>
|Step_Content=<translate>*Ensure regional settings correct - correct date format
*Rename the Ethernet Adaptors to Ethernet and EtherCAT
*Ensure the [https://stuga.dokit.app/wiki/TwinCAT_Issue_-_EtherCAT_Network_Protocol_Missing TwinCAT Protocol is installed] on the EtherCAT adaptor
*Teamviewer setup
*Administrator password set to "Stuga001"
*Add Stuga desktop image
*Latest winMulti in c:\multi</translate>
}}
{{Tuto Step
|Step_Title=<translate>Set up New Camera PC</translate>
|Step_Content=<translate>Follow standard [https://stuga.dokit.app/wiki/Create_a_TwinCAT_Project_from_Scratch Setup procedure] to step 5 to ensure sourcetree installed with latest tc3Multi software pulled to machine

<br /></translate>
}}
{{Tuto Step
|Step_Title=<translate>Add the backup to cameraPC</translate>
|Step_Content=<translate>In folder c:\DDRIVE

Copy latest messages.saw to DDRIVE</translate>
}}
{{Tuto Step
|Step_Title=<translate>Convert the TC2 project from old machine</translate>
|Step_Content=<translate>[https://stuga.dokit.app/wiki/Convert_Autoflow_TC2_Project_to_TC3 Follow this procedure] to convert the project


Map the Saw On, Conveyor and extractor as outputs rather than invertergofwd links (outputs 97 and 98)

Ensure the PLC projects are in the correct ports

851- tc3multi

852 - PLC_Reset</translate>
}}
{{Tuto Step
|Step_Title=<translate>Install the new PCs on site</translate>
|Step_Content=<translate>* Ensure the 6017 PC has been earthed adequately</translate>
}}
{{Tuto Step
|Step_Title=<translate>Set up the IP addresses</translate>
|Step_Content=<translate>Map the network drives

Map customer network connections</translate>
}}
{{Tuto Step
|Step_Title=<translate>Test all IO</translate>
|Step_Content=<translate>This is important to ensure there have been no mistakes in the remapping</translate>
}}
{{Tuto Step
|Step_Title=<translate>Test axis directions</translate>
|Step_Content=<translate></translate>
}}
{{Tuto Step
|Step_Title=<translate>Test axis Datuming</translate>
|Step_Content=<translate></translate>
}}
{{Tuto Step
|Step_Title=<translate>Check Spindles and alarms</translate>
|Step_Content=<translate>Check inverter is wired so that OK=high on X90

Check alarms trigger on low signal on inverter ok

Check 50Hz and 300Hz spindles function correctly from SpindleIO screen

{{Info|...A lot of the older machines were released with inverter OK active low, and the alarms file set up to "bodge" around this. The "correct" way should be active high which means it is also fail safe. Take this opportunity to ensure the machine is correct}}<br /></translate>
}}
{{Tuto Step
|Step_Title=<translate>Important parameters</translate>
|Step_Content=<translate>Ensure:

autoQueue=1

sawSYType=1<br />allWasteAtStart=1

throwaway=230

throwawayChunkSize=120

throwawayMaxChunk=100

throwawayMinChunk=100

throwawayEjectAtStart=1

storeOffcuts=0

<br /></translate>
}}
{{Tuto Step
|Step_Title=<translate>Check cut speeds</translate>
|Step_Content=<translate>The software highlighted a bug in the calculation for the saw cutting speed which has now been corrected. Saw cut speeds should be checked if they are not default.

{{Info|...The old software calculated the percentage based on the cut height, not the speed! It was not noticed because the cut height would be around 70-150mm (70-150%) so would not look excessively fast or slow}}</translate>
}}
{{Notes}}
{{PageLang
|Language=en
|SourceLanguage=none
|IsTranslation=0
}}
{{Tuto Status
|Complete=Draft
}}