Difference between revisions of "Turning Off and Changing Datum Tool"

[pending revision][pending revision]
 
Line 46: Line 46:
 
{{Tuto Step
 
{{Tuto Step
 
|Step_Title=<translate>Changing Datum Spindle. (If necessary)</translate>
 
|Step_Title=<translate>Changing Datum Spindle. (If necessary)</translate>
|Step_Content=<translate>If the changed spindle is the datum spindle, this message will appear. A different spindle must be selected in the machines parameters.  
+
|Step_Content=<translate>If the changed spindle is the datum spindle, this message will appear. A different spindle must be selected in the machines parameters.
 +
 
 +
The Datum tool is a Spindle fitted with a 10mm Tool
  
 
<br /></translate>
 
<br /></translate>

Latest revision as of 10:59, 9 July 2024

Author avatarStuga Engineer | Last edit 9/07/2024 by Gareth Green being drafted

Step 1 - Open win Multi



Step 2 - Press on '[F5] Settings' tab


Step 3 - Go to the tab “Tooling”

Do not alter anything on the 'Tool' Settings' side.



Step 4 - Turning Spindle Off

Using the 'Spindle Setup' menu box, select the spindle to be turned off. Using the drop down arrow circled, change the spindle 'Tool' to <Empty>



Step 5 - Save Changes

The selected spindle's 'Tool' should now be set to <Empty>. Now press Save.



Step 6 - Changing Datum Spindle. (If necessary)

If the changed spindle is the datum spindle, this message will appear. A different spindle must be selected in the machines parameters.

The Datum tool is a Spindle fitted with a 10mm Tool




Step 7 - Parameters Change

Go to the 'Parameters' tab. Then press on 'All' in the Filter box.


Step 8 - Setting New Datum Spindle

Find the parameter 'Datum Spindle Number' Click to highlight this field.


Change the spindle using the drop down box under 'Edit'. Change the datum spindle to a working tool that has not been turned off. Then Press 'Save'


The Parameter will now update.

Please note the Datum Tool Must be a 10mm router/Drill bit.


Step 9 - Exit software to windows and restart WinMulti.



Comments

Published