Voir la source de Common Issue - Critical Saw File AQS is corrupt

{{Tuto Details
|Main_Picture=Critical_Saw_File_AQS_is_corrupt_2.jpg
|Description=<translate>How to restart machine after "Critical Saw Queue File ..... is Corrupt. Please check the saw queue carefully"</translate>
|Categories=Software
|Tags=aqs, queue, corrupt
}}
<translate>If a saw queue file is corrupt, the system can sometimes struggle to deal with it. It needs to be manually deleted

<br />

#Exit winMulti
#Find the queue (.AQS) file in c:\multi\[BuildNo]\QUEUED\
#Delete the file
#Run winMulti
#Get the operator to check if the Saw Queue screen properly matches the bars on the transfer table
#Once the bar queue is sorted, Start cutting again
{{Warning|...Because the queue file is corrupted, it is likely that there is a bar missing on the saw queue. if the operator does not spot this, the bar queue will be out of sync by one bar and lots of scrap produced}}<br /></translate>
{{PageLang
|Language=en
|SourceLanguage=none
|IsTranslation=0
}}
{{AddComments}}
{{Tuto Status
|Complete=Draft
}}