Z108 - Has been updated

4 x G clamps are Required It is for 2 x People - 3 days

Z055 - ZX4 has been fitted using existing Software setup so Ou_InvDP not used (24v linked to S3 and S4.X308 - Inverter Zero fitted but not used. Uses Drive Run Fwd not using SMOT.

STO alarm Please see https://stuga.dokit.app/wiki/Yaskawa_Inverter_-_Fault_and_Alarm_Output_Functionality Once wiring changes have been made, change parameter H2-03 to 110. This can be done online via DriveWizard or directly through the inverter touchpad.

Z082 is a ZX5E - No Beam on GX axis - How many links will it need

Newer Versions have battery in a different place (Z073) - Photos added to Step 2 and also its Soldered in with a connector These are on the H370M- ITX Gen3 x4 Motherboards

Datum Spindle is a Spindle with a 10mm Tool fitted .

Z071 -- also needs the -30 (3mm) left position offset - Uses FDS Zeb files originally set to 101mm

Also Done to F031 - Who use ZEB FDS label Width set to 832 Left margin offset -30 (3mm)