Autocut Monthly Maintenance : Différence entre versions

[version en cours de rédaction]

Version actuelle datée du 23 octobre 2019 à 18:25

Carry out these checks once per month alongside daily and weekly checks

Difficulté

Facile

Durée

20 minute(s)

Carry out these checks once per month alongside daily and weekly checks

Difficulté

Facile

Durée

20 minute(s)

autocut, monthly, maintenance Checklist-800x531.png

Lubricate the chain every 500mm with a drop of oil - use a wire brush to really give a good clean at the same time.

There are 4 grease nipples on the main saw blade assembly - 1 pump of grease is required for each nipple.

...If this is an older machine, the grease nipples may not be fitted. Oil the shafts instead

This is the hatch below the eject table area - there is 4 x M6 bolts to take out

There are 4 grease nipples under eject - 1 pump of grease is required for each nipple.

...If this is an older machine, the grease nipples may not be fitted. Oil the shafts instead

Tutorial for Saw Blade change:

Change the saw belts if they are showing signs of wear or fraying

en none 0 Draft

@@ Ligne 1 : / Ligne 1 : @@
 {{Tuto Details
+|Main_Picture=Checklist-800x531.png
+|Main_Picture_annotation={"version":"2.4.6","objects":[{"type":"image","version":"2.4.6","originX":"left","originY":"top","left":-44,"top":-23,"width":800,"height":531,"fill":"rgb(0,0,0)","stroke":null,"strokeWidth":0,"strokeDashArray":null,"strokeLineCap":"butt","strokeDashOffset":0,"strokeLineJoin":"miter","strokeMiterLimit":4,"scaleX":0.92,"scaleY":0.92,"angle":0,"flipX":false,"flipY":false,"opacity":1,"shadow":null,"visible":true,"clipTo":null,"backgroundColor":"","fillRule":"nonzero","paintFirst":"fill","globalCompositeOperation":"source-over","transformMatrix":null,"skewX":0,"skewY":0,"crossOrigin":"","cropX":0,"cropY":0,"src":"https://stuga.dokit.app/images/1/16/Checklist-800x531.png","filters":[]}],"height":449.8504486540379,"width":600}
 |Description=<translate>Carry out these checks once per month alongside daily and weekly checks</translate>
 |Categories=Maintenance