]> 2026-05-26T07:21:04+02:00 Upgrade - Gripper Slider Mechanism 0 en Draft Upgrade to fit new gripper slide mechanism Very easy 60 minute(s) false en Upgrade_-_Gripper_Slider_Mechanism_Slider_4.JPG none Remove all existing parts, including the profile lever, slideway and bearings, and the spring. Install new stronger slideway Fit two new stronger bearings, and put new spring into front hole. Position the new profile lever over the slideway bearings, so that the bearings positively lock into the holes on the profile lever. Ensure that the spring is encapsulated properly. Screw in the new shoulder screw and check for forward-backwards movement on profile lever. Screw the profile lever down to the bearings. Check that the profile lever moves backwards under light pressure, and then returns forward via the spring. Remove existing slideway and profile lever Fit the new stronger bearings Offer up the new profile lever, and fit new shoulder screw Use the fixtures to firmly attach the profile lever to bearings Operational check 2021-01-05T10:59:58Z 2459219.9583102 Upgrade - Gripper Slider Mechanism 0 false false 0 0 0 1 plainlist 3 [[:Dokit:DocOptions]] [[DokitEPIEnable::yes]] Upgrade - Gripper Slider Mechanism# QUERYee7a61aae48f1c3f91d8e4d7736360be