]> 2026-05-26T07:22:40+02:00 Setting Gripper Nose 0 en Draft How to correctly set the gripper nose mechanics Medium 20 minute(s) It is very important to ensure the gripper nose and heel is correctly set up. This assembly is subject to a lot of wear and tear and maintenance is very important. Incorrect setting or play in this assembly is a major cause of accuracy issues false en Setting_Gripper_Nose_Annotation_2019-11-13_140338.jpg none when it is in this position - Fully bottomed make sure the Grip on comes down but doesn't catch the Grip nose. Notice the Dead stop bolt at bottom is hard up then set grip switch bolt so that the dead stop bolt gap is no more than 1mm when grip switch goes off. See - [https://stuga.dokit.app/w/Mk10%20Gripper%20Setup Mk10 Gripper Setup] Temporary Instructions Ensure the profile bottoms out on the gripper nose not holder Gripper Nose Heel 2023-11-15T17:22:44Z 2460264.2241204 Setting Gripper Nose 0 false false 0 0 0 1 plainlist 3 [[:Dokit:DocOptions]] [[DokitEPIEnable::yes]] Setting Gripper Nose# QUERYee7a61aae48f1c3f91d8e4d7736360be