]> 2026-05-26T11:13:48+02:00 R0015303 Fit backplates and covers 0 en Draft Fitting of final parts to rotary ring after electrical installation and function testing Medium 2 hour(s) '''<u>Tools Required</u>''' Standard screw driver set Standard hex key set Countersink tool '''<u>Parts Required</u>''' D0007777 Back plate x 2 D0007844E Connection box lid x 8 <br/> false en Fit_backplates_and_covers_Screenshot_2023-06-05_081648.png none Use Loctite 243 on all fasteners Pen mark all bolts to show finalised D0007777 backplate 2 off need checking before fitment to rotary ring. M5 countersink bolt should be flush when fitted . 1 Fastener should be as shown 2 If fastener sits proud, rework plates with countersink tool to ensure correct seating of fastener <div class="icon-instructions caution-icon"> <div class="icon-instructions-icon"><i class="fa fa-exclamation-triangle"></i></div> <div class="icon-instructions-text">...Always take care when rotating the ring at this stage. Ensure rotary trunking is monitored at all points when rotating, and any tight spots or issues should be investigated immediately. Rotary trunking damage is easy when access panel is loose</div> </div> 1 Detach rotary trunking inspection cover. 2 Rotate ring to set datum pin as shown 3 Slide backplate into position between points indicated 4 Use m5 x 10 countersink fasteners and add 1 off to point that is available in current position <br/> 1 Now rotate ring to position one end of fitted backplate at access point, and add 2 off fasteners 2 Rotate ring until other end of back plate is above access point , and add 2 off fastener 3 Now add remaining fasteners to fitted backplate , rotating the ring to provide access at each point 1 Rotate ring to allow backplate 2 to be slid into correct position 2 Add 1st faster at point available, then rotate ring to add fasteners to both ends of back plate 3 Rotate and add remaining fasteners 4 Ensure backplate joins sit flush to each other <br/><div class="icon-instructions info-icon"> <div class="icon-instructions-icon"><i class="fa fa-info-circle"></i></div> <div class="icon-instructions-text">...There will be 2 fixing points that will not be accessible at any point. These points do not require fasteners adding</div> </div> Refit cover with m5 Nyloc nuts and washers 8 off D0007844E Connection box covers now need fitting 1 Position cover over connection box, and add 1 off m3 x 10 pan head fastener to point indicated 2 Add 2 off m3 x 12 socket caps with a form washer to point indicated 3 Check spindle slide movement on both assemblies that sit next to the fitted cover to ensure no contact occurs with fitted lid and slide assemblies Repeat for 7 off remaining connection boxes Unless otherwise stated Prepare backplates D0007777 Ring Rotation Fit 1st Backplate A Fit 1st Backplate B Fit 2nd backplate Refit Access panel Fit connection box covers 2023-06-23T11:24:45Z 2460118.9755208 R0015303 Fit backplates and covers 0 false false 0 0 0 1 plainlist 3 [[:Dokit:DocOptions]] [[DokitEPIEnable::yes]] R0015303 Fit backplates and covers# QUERYee7a61aae48f1c3f91d8e4d7736360be Fit backplates and covers 0 fr Fit backplates and covers