]> 2026-06-13T20:48:33+02:00 R000559 Bench assemble machined parts 0 en Draft Preparation for machining Medium 0.25 hour(s) '''<u>Tools Required</u>''' standard hex key set '''<u>Parts Required</u>''' D0004142 Backfence Support Bar x 2 D0004598 Backfence Bar Support x 1 false en R000559_Bench_assemble_machined_parts_Screenshot_2023-09-12_081924.png none All bolts to have Loctite 243 adhesive applied unless otherwise stated All Threaded Pneumatic connections to have Loctite 570 applied All bolts to be pen marked once adhesive applied and correct tension added Check the indicated area for correct fitment There should be no gap present , check with feeler gauges Tolerance 0.002"/0.05mm Pass to machine shop for alignment machining Indicated faces required skimming to be true to each other Quality check bars for size, flatness and burrs. Check fit or arms into mounting bar. Arms must be a good fit into mounting bar, but not tight. Inspect parts if loose or tight fit is observed Assemble D0004142 Backfence Support Bar x 2 and D0004598 Backfence Bar Support x 1 as shown Use 4 off M8 x 40 socket caps to fix Unless otherwise stated Assemble Check Pass to machine shop 2023-11-06T08:38:03Z 2460254.8597569 R000559 Bench assemble machined parts 0 false false 0 0 0 1 plainlist 3 [[:Dokit:DocOptions]] [[DokitEPIEnable::yes]] R000559 Bench assemble machined parts# QUERYee7a61aae48f1c3f91d8e4d7736360be