]> 2026-05-26T09:14:38+02:00 PC Bios Power settings 0 en Published Changing the BIOS. Power settings on ASUS PC Easy 5 minute(s) This power setting enables the PC to Boot up automatically when power is first detected, in other words when the power is “lost” and then “returns”, without the necessity to manually press the power button on the PC.            The following description shows how to set the auto power-up on but beware this Technical Bulletin only applies to the “ASUS UEFI Utility BIOS Version 2.x.x”. This document is for the ASUS Pcs For the Dell PCs use [[PC Bios Power Settings - Dell]] false en PC_Bios_Power_settings_Picture1.png none Keep pressing the “DELETE “button on the keyboard until the PC goes into the BIOS mode and you see a screen similar to the ones shown below. If the BIOS screen does not show wait for the PC to LOGIN into windows and then shut-down or restart the PC again and retry using the delete button as described above. The Menu Will look something similar to this Press on the 'Advanced mode' option. Normally the shortcut is 'F7' Ignore this step if you already see 'Advanced Mode' on the top left corner.. Once on the Advance Page the Click the Advance Tab Next click on the 'APM Configuration' Change the Restor eAC power loss from from 'Power off 'to 'Power on' Once Done Exit the BIOS settings by Pressing “F10” on your keyboard and make sure all settings are saved. The PC should then reboot. Allow the PC to boot into windows. Opening BIOS menu Switch To Advanced Mode Go to Advanced tab Go to APM configuration Change Restore AC Power Loss setting Exit and Save Turn the PC on using the Power Button 2023-11-13T12:07:26Z 2460262.005162 PC Bios Power settings 0 false false 0 0 0 1 plainlist 3 [[:Dokit:DocOptions]] [[DokitEPIEnable::yes]] PC Bios Power settings# QUERYee7a61aae48f1c3f91d8e4d7736360be