]> 2026-04-28T00:50:53+02:00 Move SR Datum Sensor to Higher Level R0019217 0 en Draft Moving the SR axis datum sensor to a higher level to prevent damage and improve reliability Autoflow Mk4 only Hard 2 hour(s) On a Mk4 Autoflow, The SR axis daum sensor is originally located at the rear and to the base of the SR axis. This area is prone to offcuts, so a new location has been designed at the top, with the following design parameters *Easy to retrofit *Sensor is protected in a case *Short distance to connection box *Uses existing mounting holes *Easy to adjust and maintain *Sensing end location should be vertical onto a plate, not horizontal on to a radiused surface *Can use E0000336 2mm range sensor reliably *Incorporate a front fence to help deflect offcuts down the chute and to protect the sensor The parts are supplied in Kit R0019217B <div class="icon-instructions info-icon"> <div class="icon-instructions-icon"><i class="fa fa-info-circle"></i></div> <div class="icon-instructions-text">...In November 23, a second iteration of the design was released using metal parts and a side fence to improve robustness (R0019217B)</div> </div><br/> <div class="icon-instructions info-icon"> <div class="icon-instructions-icon"><i class="fa fa-info-circle"></i></div> <div class="icon-instructions-text">...The pictures and models illustrated here are from a Right to Left feed machine. Parts are unhanded so can be fitted to either hand machine</div> </div><br/> false en Move_SR_Datum_Sensor_to_Higher_Level_R0019217_Screenshot_2023-12-01_084848.jpg none Replace the upper brace plate with D0016338. This has the detection plate for the SR axis added on the top Sensor Cable X126 replaces the original cable in top channel (see pic) Tidy the cable into a loop and cable tie along length to saw frame upright strut <br/> Adjust the height of the sensor so it is 0.5-1mm clear of SR Detection Bracket Check the sensor switches on and off with rotation of SR axis Check the input flashes on and off the EtherCAT box Changing the datum sensor location will mean that the SR datum position will need to be reset <br/> #Assemble the cable using E0001046 cable plus E0001069 #Add E0000336, and assemble in to D0016348 Autoflow SR Sensor holder #The sensor (with fastening nut) should protrude 5mm from base of holder Brackets: 2 off D0016350 Guard: 1 off D0016349 Fit Replacement SR Detection bracket Assemble Sensor Cable and Holder Fit wire Adjust Datum sensor height Reset Datum Add the top guard and brackets 2023-12-01T14:36:49Z 2460280.1089005 Move SR Datum Sensor to Higher Level R0019217 0 false false 0 0 0 1 plainlist 3 [[:Dokit:DocOptions]] [[DokitEPIEnable::yes]] Move SR Datum Sensor to Higher Level R0019217# QUERYee7a61aae48f1c3f91d8e4d7736360be Fitting R0019199 Upgrade: Autoflow Slewing Ring Guard Kit 0 en Fitting R0019199 Upgrade: Autoflow Slewing Ring Guard Kit Check the sensor Gap 844 fr Check the sensor Gap Prerequisites 102 fr Prerequisites Comment on 102 fr Comment on