]> 2026-05-26T10:21:05+02:00 Hotswap Beckhoff PLC with Licence Slice Installed 0 en Draft Swapping a Beckhoff PC on an machine with EL6070 Licence Slice installed Medium 15 minute(s) If a machine is set up with an EL6070 Licence Slice, the PLC can be swapped freely and the TwinCAT licence remains on the slice in the machine '''Note: Beckhoff PCs involved are''' Windows 10 versions order code C0001182 <div class="icon-instructions caution-icon"> <div class="icon-instructions-icon"><i class="fa fa-exclamation-triangle"></i></div> <div class="icon-instructions-text">...If a replacement PC is supplied, the CFAST card will need to be exchanged from the non functional PC to the new PC</div> </div> false en Hotswap_Beckhoff_PLC_with_Licence_Slice_Installed_hsTwoPCs.jpg none There are a row of retaining clips on bot the top and bottom of the PC that hold it to the Din rail. Pop them open with a flathead screwdriver On the right hand side of the PC there are a 2 columns of yellow, white and earth power cables. All must be removed using a small flathead screwdriver to release the friction clamps on the cables This clip is the final fastening to the din rail Yellow into + / 24v White into - / 0v G/Y into PE Yellow in top Green in Bottom In the c:\ddrive\params.saw file, two AMS Net Id's need to be changed The specific values are unique for each PC used - refer to the c:\DDRIVE\log.mul file Power Off Pop the retaining clips for the PC Remove the network cables Remove the power cables Pull the Orange Retaining clip Swap the PCs Reattach Power Cables Replace Network Cables Change the AMS Net Id settings EL6070 Licence 2025-01-20T13:37:33Z 2460696.0677431 Hotswap Beckhoff PLC with Licence Slice Installed 0 false false 0 0 0 1 plainlist 3 [[:Dokit:DocOptions]] [[DokitEPIEnable::yes]] Hotswap Beckhoff PLC with Licence Slice Installed# QUERYee7a61aae48f1c3f91d8e4d7736360be