]> 2026-04-28T11:50:50+02:00 Dismantle Autoflow Mk4 0 en Draft How to safely dismantle an Autoflow Mk4 for transport Medium 4 hour(s) false en Dismantle_Autoflow_Mk4_IMG_8598.JPG none [[Stowing Stuertz Infeed Table]] 6 off spindles Tie the R axis at the datum assembly point Y axis roughly to middle Cut profile blocks and tie in to prevent movement Wind Z axis to bottom of travel Take care to ensure MH outfeed top clamp is not compromised * Ensure the correct number of fittings sent * # MH Infeed Top # MH Infeed Side # MH Outfeed Top # MH Outfeed Side # Saw Infeed Side # Saw Outfeed Side # Ejector top # Saw Outfeed top # # Detach all cables and pipes at the carriage end ensuring it is clearly labelled where they re-attach # Remove rail mounting bolt(s) on machine side of rail # Remove the shoulder bolts connecting the assembly to the fram # Second person needed to support weight of carriage while lifting off # Package carefully with bolts # Tie back the ejector energy chain # Tie back the assembly Package Printer in original box Thoroughly clean the machine of swarf and material Prepare the infeed for transport Prepare the tooling heads for transport R Axis Y Axis Z axis Check and Pack guarding Tie All Clamps Safely JX Ejector Axis Lower Eject Assembly Air gun stowage Conveyor Extractor Tie doors shut 2023-03-01T15:39:43Z 2460005.152581 Dismantle Autoflow Mk4 0 false false 0 0 0 1 plainlist 3 [[:Dokit:DocOptions]] [[DokitEPIEnable::yes]] Dismantle Autoflow Mk4# QUERYee7a61aae48f1c3f91d8e4d7736360be