]> 2026-04-28T00:38:20+02:00 D0008557 Modified cylinder Assembly 0 en Draft Instructions to pre assemble modified cylinder before dispatch Easy 10 minute(s) '''<u>Parts required</u>''' D0008557 modified cylinder x 1 F0000016 M6 x 30 socket cap x 2 F0000018 M6 x 40 socket cap x 2 M0000180 spring x 2 '''<u>Tools required</u>''' 5mm Hex key Loctite 270 thread lock false en D0008557_Modified_cylinder_Assembly_Screenshot_2025-04-15_150325.png none Remove 4 off original shallow head fasteners (if still fitted after cylinder modification) ) that hold locking assembly onto cylinder and dispose Ensure cylinder and locking unit are orientated correctly as shown Ensure all bolts fitted have Loctite 270 applied Fit 2 off M0000180 springs to F0000018 M6 x 40 socket caps as shown and fit to cylinder <br/><div class="icon-instructions caution-icon"> <div class="icon-instructions-icon"><i class="fa fa-exclamation-triangle"></i></div> <div class="icon-instructions-text">...Only wind the socket caps in 2 turns to allow fitment of next step socket caps</div> </div><br/> Fit 2 off F0000016 M6 x 30 socket caps as shown Tighten all for socket caps until the bottom out at the base of the threaded hole om the cylinder Check locking assembly can move by hand when pulled in the direction shown, And springs back to its original position by spring pressure alone <br/> Check locking assembly can move by hand when pulled in the direction shown by approximately 5mm, and springs back to its original position by spring pressure alone <br/> Remove Original fasteners on locking mechanism Ensure Cylinder and locking unit are orientated correctly Loctite 270 MUST be used Add 1st fixings Add 2nd fixings Tighten all fixings Check movement 2025-04-16T16:07:59Z 2460782.1722107 D0008557 Modified cylinder Assembly 0 false false 0 0 0 1 plainlist 3 [[:Dokit:DocOptions]] [[DokitEPIEnable::yes]] D0008557 Modified cylinder Assembly# QUERYee7a61aae48f1c3f91d8e4d7736360be