]> 2026-05-26T18:44:15+02:00 Changing the Flowline Ops Password 0 en Draft This tutorial will instruct the operator in the correct procedure to change the password in Flowline Ops Very easy 5 minute(s) A password can be set up within FlowlineOps that limits access to the Edit Machining and Edit Profiles buttons, This tutorial will explain how to setup or change this password. false en Changing_the_Flowline_Ops_Password_password.jpg none Within FlowlineOps click on the unlock Button in the toolbar, you will be required to enter a challenge password to enter this area, this can be obtained from https://www.stuga.co.uk/unlock-code/ Click on the settings Button in the toolbar, this will open up the settings screen shown in Picture 2. <br/> When you click on the Change Password Button you will be shown the screen here. Enter your existing password in the Text Box marked 1. If you have forgotten the old password, please contact Stuga Support and they will be able to set this up. Enter your new password twice (to prevent Mistypes) in the Textboxes marked with a 2 Click on Either the No Password Required Button marked 3 or Set New Password Button Marked 4, this will set the program so no password is required if you pressed button 3 or it will set the new password if you pressed button 4 <br/> Unlock the Administrator Screen Enter the Settings Screen Click on the Change Password Button FlowlineOps Password 2020-10-30T12:30:15Z 2459153.0210069 Changing the Flowline Ops Password 0 false false 0 0 0 1 plainlist 3 [[:Dokit:DocOptions]] [[DokitEPIEnable::yes]] Changing the Flowline Ops Password# QUERYee7a61aae48f1c3f91d8e4d7736360be