]> 2026-05-26T19:41:13+02:00 Autocut Startup Procedure 0 en Draft How to safely switch on and startup a Stuga Autocut Machine Very easy 10 minute(s) false en Monday_-_Getting_Started_For_Engineers_getstartedjgp.jpg none Ensure the main isolator on the console is in the on position (pointing up). Press the green 'POWER ON' button on the saw console. winSaw software will start automatically when it is ready (this may take up to 60 seconds) If the software does not start automatically, double click the winSaw logo Press the box in the middle of the screen 'Press here to initialise'. <div class="icon-instructions info-icon"> <div class="icon-instructions-icon"><i class="fa fa-info-circle"></i></div> <div class="icon-instructions-text">...If you have an error connecting to the mapped network drive, double click the 'Batches' icon on the desktop. Once connected, you can now load winSaw and go back to step 3</div> </div><br/> Press the physical blue 'ES RESET' button on the console to reset the emergency stop circuit <div class="icon-instructions info-icon"> <div class="icon-instructions-icon"><i class="fa fa-info-circle"></i></div> <div class="icon-instructions-text">...If the Estop does not reset, one of the buttons is still pressed in or a guard door is open</div> </div><br/> Press the physical green 'START' button to initialise the machine - this will home the pusher axis. Isolator On Press Power On Button Wait for Windows to Boot Initialise Reset Estop Press Start To Initialise Autocut Startup Power 2019-10-23T16:52:44Z 2458780.203287 Autocut Startup Procedure 0 false false 0 0 0 1 plainlist 3 [[:Dokit:DocOptions]] [[DokitEPIEnable::yes]] Autocut Startup Procedure# QUERYee7a61aae48f1c3f91d8e4d7736360be