]> 2026-04-27T22:59:49+02:00 Autocut Daily Maintenance 0 en Draft Daily maintenance tasks on a Stuga Autocut machine Very easy 1 hour(s) This checklist should be carried out at the end of every day false en Checklist-800x531.png none Once the machine has stopped production, press an emergency stop button to ensure the machine is safe to work on [[Autocut Open Guard Doors|https://stuga.dokit.app/wiki/Autocut_Open_Guard_Doors]] Open the saw access hatch, this is the hatch below the eject table area - there is 4 x M6 bolts to take out. Give the infeed area a good blow down - including the chain and pusher arm Give the saw cutting area a good blow down - making sure you remove the swarf and offcut buildup at the base <div class="icon-instructions pin-icon"> <div class="icon-instructions-icon"><i class="fa fa-thumb-tack"></i></div> <div class="icon-instructions-text">...Remember to check for small triangular offcuts behind the backfence</div> </div><br/> Give the eject table area a good blow down, allowing the swarf buildup to fall through the access hatch Give the outfeed table area a good blow down The cloth filter bags will easily clog with fine particles of cutting swarf. These are easily dislodged by shaking the bags Empty the lower polythene extraction bags if required Press Estop Open Doors Open Eject Access Hatch Blow Down Infeed Blow Down Saw Cutting Area Blow Down Eject Table Area Blow Down Outfeed Table Shake the Extractor Cloth Bags Empty Polythene extractor bags Autocut daily maintenance 2019-10-10T16:39:25Z 2458767.1940394 Autocut Daily Maintenance 0 false false 0 0 0 1 plainlist 3 [[:Dokit:DocOptions]] [[DokitEPIEnable::yes]] Autocut Daily Maintenance# QUERYee7a61aae48f1c3f91d8e4d7736360be Autocut Regular Maintenance 0 en Autocut Regular Maintenance Prerequisites 102 fr Prerequisites