]> 2026-04-27T23:15:08+02:00 Autocut Cutting Tall Profiles 0 en Draft How to configure a Stuga Autocut saw to cut tall profiles Very easy 5 minute(s) What to do when cutting tall profiles; such as VS outerframe and patio outerframe false en none Take 'AUTOLOAD' off before coming onto either of these profiles so the saw stops it automatic loading cycle Once the machine has stopped and the next bar in the queue is a tall profile, open the guard door [[Autocut Open Guard Doors|https://stuga.dokit.app/wiki/Autocut_Open_Guard_Doors]] Loosen (push in and turn anti-clockwise) the quick release handles for the saw clamp assembly and the eject clamp assembly Now move each clamp assembly up so the block is inline with the marking on the shaft. Tighten (push in and turn clockwise) the orange quick release handles Pull the orange quick release handles out (towards you) and swivel them so they are pointing up Autoload Off Open Door Loosen the Quick Release Kipp Clamp Levers Raise Clamps to clear profile Retighten Clamps Reverse the process when changing back to low profiles Autocut VS Tall Profile Clamps 2019-10-10T17:08:32Z 2458767.2142593 Autocut Cutting Tall Profiles 0 false false 0 0 0 1 plainlist 3 [[:Dokit:DocOptions]] [[DokitEPIEnable::yes]] Autocut Cutting Tall Profiles# QUERYee7a61aae48f1c3f91d8e4d7736360be