]> 2026-04-27T22:57:49+02:00 ACEpc Network Software - IP 0 en Draft Setting up a ACEpc with the NETSETGO software to interface with an IP address to a Windows XP or earlier computer. Easy 10 minute(s) false en none Volume label [enter] This will format the hard drive and then copy all necessary network software as a ZIP file to the hard drive and then inflate it. Build number must be unique. If a flowline saw put an "s" on the end. i.e. F073S Supplied by customer. If testing in house it needs to be on the 192.168.16.xxx range. e.g 192.168.16.101 <br/> Press escape - then Y Unable to open params.saw file is normal. If this is for a Flowline - Build Number of Flowline machining center Otherwise this will be the net NETBEUI name of the pc you are connecting to. For testing at stuga this will be NAS1 If this is for a Flowline - IP Address of Flowline machining center Otherwise this will be the IP address of the pc you are connecting to. For testing at stuga this will be 192.168.16.6 Successful if D:\ prompt. Insert disk (Power off) Power On Proceed with format Y NetEdit Saw Name Saw IP address Multi Name Multi IP Save + Exit Remove Disk + Reboot 2019-08-27T15:16:56Z 2458723.1367593 ACEpc Network Software - IP 0 false false 0 0