R0015245 Module C support arm alignment

Alignment of loading arm assembly

Par Gareth Green

24 étapes

Aucune étape

Sommaire

Accueil 1. Unless otherwise stated 2. Ensure all tape/packaging is removed from components 3. Fitting of Mounting Channel 3 4. Fitting of Mounting channel 2 5. Fitting of mounting channel 1 6. Finalising Fixings 7. Quality Check Required 8. Dowel in Position 9. Clean Threads 10. Mount support channels 11. Mount Support arms to frame 12. Add support brace to Arm 13. Repeat step 8 and 9 14. Assemble and fit Maytec arm support 15. Arm alignment 16. Quality Check ! 17. Dowel and Fastener finalisation on arms 1 to 7 18. Ensure alignment of end sections 19. Drill final 8mm dowel points 20. Finalise position of arms 8 and 9 21. Set wire line and positions arms 8 and 9 22. Quality Check required 23. Drill and Dowel 24. Alignment complete!

Matériaux & outils nécessaires

Matériaux

Aucun matériel spécifié...

Outils

Aucun outil spécifié...