R0015046 Bench Assemble Infeed Clamps

Instructions to bench assemble infeed clamp assembly

Par Gareth Green

19 étapes

Aucune étape

Sommaire

Accueil 1. Unless otherwise stated 2. Fit bearings to main blocks 3. Check fitment of the following rollers 4. Check fit of shafts in bearings 5. Degrease and bearing fit 6. Fit shafts 7. Fit z block 8. Attach cylinder 9. Fit z roller plate 10. Mount low rollers 11. Assemble top roller Block 12. Attach shafts and mount 13. Fit cylinder extension 14. Attach shaft strap 15. Attach cylinder 16. Adjust alignment for correct operation 17. Ensure correct position 18. Assemble profile stop cylinder 19. Attach to main assembly

Matériaux & outils nécessaires

Matériaux

Aucun matériel spécifié...

Outils

Aucun outil spécifié...