R0015028D ZX5 Hepco Beam Alignment Module C

Instructions for mounting and aligning hepco x axis beam

Par Gareth Green

29 étapes

Aucune étape

Sommaire

Accueil 1. Unless otherwise stated 2. Additional spacer 3. Please Note 4. Attach Setting jigs 5. Level Setting Jigs 6. Level x axis between jigs 7. Wire line for setting straightness 8. Quality Check 9. Position Hepco double edge slide 10. Mechanically join Hepco beam 11. Set beam position 12. Assemble carriage 13. Set journals 14. Fit wipers and finalise 15. Refit carriage plate 16. Check level of carriage plate 17. 1st stage levelling 18. 2nd stage levelling if required 19. Laser checks 20. Finalise hepco join 21. Quality Check 22. Fit linear rails 23. Level linear rails 24. Attach mounting brackets 25. Fit bearings and finalise mounts 26. Quality check 27. Dowel in position 28. Quality 29. Remove setting jigs . grease bearings and fit blanking plugs

Matériaux & outils nécessaires

Matériaux

Aucun matériel spécifié...

Outils

Aucun outil spécifié...