Correcting Linearity with Rack Offset File

How to use the rackOffset features in v6.4.37.0 to correct incorrect linearity on a gripper rack

Par Gareth Green
Démarrer

10 étapes

Aucune étape

Sommaire

Accueil 1. Temperature Warning 2. Choose your yardstick and check linearity 3. Ensure your measuring equipment matches the calibration 4. Create Linearity Test Bars 5. Check Consistency 6. Measure position of each slot from datum end 7. Find the actual positions of the operations 8. Add operation positions and offsets 9. Test again 10. More information

Matériaux & outils nécessaires

Matériaux

  • Aucun matériel spécifié...

Outils

  • Aucun outil spécifié...