Commissioning - Z-Block Calibration

Commonly used during sawing on Z transoms, the Z block operation is used to fasten the profile, making sure it does not move during sawing.

Par Anonymous

5 étapes

Aucune étape

Sommaire

Accueil 1. Turret A - Find Position 1 on the Turret 2. Check the Binary Count of the Turret 3. Repeat for the outfeed turret 4. Check the Labelling is correct 5. Check Turret Home for Infeed and Outfeed turret

Matériaux & outils nécessaires

Matériaux

Aucun matériel spécifié...

Outils

Aucun outil spécifié...